Three numbers make a mat
- Outer size = the frame size. An 11 × 14 frame takes an 11 × 14 mat.
- Window (opening) = the print minus the overlap on each side. For an 8 × 10 with a ¼ in overlap the window is 7.5 × 9.5 in.
- Border = (outer − window) ÷ 2. Here 1.75 in at the sides and 2.25 in at the top and bottom.
Common mat sizes
| Frame (outer) | Window, ¼ in overlap | Window, ⅛ in overlap | Border side × top | |
|---|---|---|---|---|
| 8 × 10 | 5 × 7 | 4.5 × 6.5 in | 4.75 × 6.75 in | 1.75 × 1.75 |
| 11 × 14 | 8 × 10 | 7.5 × 9.5 in | 7.75 × 9.75 in | 1.75 × 2.25 |
| 11 × 14 | 8.5 × 11 | 8 × 10.5 in | 8.25 × 10.75 in | 1.5 × 1.75 |
| 16 × 20 | 11 × 14 | 10.5 × 13.5 in | 10.75 × 13.75 in | 2.75 × 3.25 |
| 18 × 24 | 12 × 18 | 11.5 × 17.5 in | 11.75 × 17.75 in | 3.25 × 3.25 |
| 20 × 24 | 16 × 20 | 15.5 × 19.5 in | 15.75 × 19.75 in | 2.25 × 2.25 |
| 24 × 36 | 20 × 30 | 19.5 × 29.5 in | 19.75 × 29.75 in | 2.25 × 3.25 |
| 30 × 40 | 24 × 36 | 23.5 × 35.5 in | 23.75 × 35.75 in | 3.25 × 2.25 |
Use ¼ in for photos printed with a border you do not mind hiding. Use ⅛ in when the image goes right to the edge and you want to keep as much as possible.
Bottom weighting
Framers often make the bottom border a little wider than the top. It stops the picture from looking as if it is sliding down, an effect of how we see a centred object on a wall. Half an inch is typical on medium frames; one inch on large ones. The calculator above moves the window up by half the extra.
Mats for prints that do not match the frame
When the print has a different shape from the frame, the borders are uneven. A 12 × 18 print in a 16 × 20 frame gets 2.25 in at the sides but only 1.25 in at the top and bottom. A 20 × 30 in the same frame does not fit at all. Fixes:
| Problem | Fix |
|---|---|
| Borders look lopsided | Cut a custom window and accept wider top/bottom borders, or pick a frame with the same shape as the print |
| Print longer than the window allows | Move up a frame size, or trim the print |
| Phone photo (3:4) in an 8 × 10 frame | Print 6 × 8 and cut a window of 5.5 × 7.5 in |
| Square photo | Use a square frame or a rectangular mat with a square window |
Double mats and colour
A double mat stacks two boards; the lower one shows as a thin line (about ¼ in) inside the window. Measure the top mat as above and cut the lower window ¼ in smaller each side. White or off-white works for almost every photo; a dark inner line picks out a colour from the image.
Measure the print itself, not the image on it, and in both directions. Prints from labs are often a few millimetres off nominal size.